Skip to main content
Log in
S10B-XH-A — JST product photo
JST

S10B-XH-A JST XH Series 10-Pin 2.5mm Right-Angle Header

MPNS10B-XH-A
Active

JST Sales America Inc., XH series, Board to Cable/Wire, Header, Male Pin, 10 Positions, 2.50mm Pitch, Through Hole Right Angle, Shrouded - 4 Wall, Detent Lock, Tin Mating Finish, 3A, 250V, UL94 V-0, -25°C to 85°C, Bulk.

$0.5600Ref. price · indicative, final on quote
S10B-XH-A datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

S10B-XH-A Technical Specifications
ParameterValue
SeriesXH
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeDetent Lock
Voltage rating250V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.240\" (6.10mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions10
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin

Product details

10-position 2.50mm pitch right-angle header for wire-to-board duty

Tin plating on the mating finish and post suits moderate mating cycles in non-corrosive environments.

The S10B-XH-A mates with JST XH series crimp receptacle housings (e.g., XHP-10) loaded with SXH-001T-P0.6 or equivalent crimp terminals. The 4-wall shroud and detent lock ensure the housing can only be inserted one way and locks positively — if it backs out, it's scrap. Termination is press-fit, solder — the through-hole tails are 0.134" (3.40mm) long, designed for wave or hand soldering.

This part is RoHS non-compliant. If your application requires RoHS compliance, the alternative S10B-XH-A(LF)(SN) or S10B-XH-A-1(LF)(SN) carries the same electrical and mechanical specs but with lead-free solder tails and tin plating that meets RoHS exemption limits.

Frequently asked questions

What is the mating connector for S10B-XH-A?

The mating half is a JST XH series crimp receptacle housing, such as XHP-10, loaded with SXH-001T-P0.6 crimp terminals. The 4-wall shroud and detent lock ensure correct orientation and positive retention.

Is S10B-XH-A RoHS compliant?

No, the S10B-XH-A is RoHS non-compliant. For RoHS-compliant alternatives, consider S10B-XH-A(LF)(SN) or S10B-XH-A-1(LF)(SN), which share the same electrical and mechanical specifications.