JST NSH series, SM02B-NSHSS-TB, 2-position single-row 1.00 mm pitch right-angle SMT header, shrouded 4-wall, latch holder, tin-plated male pins, rated 1 A at 50 V, UL94 V-0 nylon, -25°C to 85°C.
| Parameter | Value |
|---|---|
| Series | NSH |
| Gender | Male Pin |
| Mounting type | Surface Mount, Right Angle |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.173\" (4.40mm) |
| Insulation material | Polyamide (PA), Nylon |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Rows | 1 |
| Pitch | 0.039\" (1.00mm) |
| Positions | 2 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The SM03B-NSHSS-TB shares the same 1.00 mm pitch, right-angle SMT termination, latch holder, and 1 A rating, but carries 3 positions instead of 2. If your BOM calls for a 2-position header, the SM02B-NSHSS-TB is the correct choice; the 3-position variant adds an extra circuit for a signal pair or power pair.
The (LF)(SN) suffix typically indicates lead-free and tin-plated versions. Both share the same 2-position, 1.00 mm pitch, right-angle SMT, latch holder, and 1 A rating. The non-(LF) variant is listed as RoHS non-compliant; confirm the (LF)(SN) version's RoHS status separately.
This header mates with the NSH series crimp-style receptacle housing. The mating half uses the same 1.00 mm pitch and latch holder interface.