It uses a 0.071 in (1.80 mm) pitch — tight enough to save board space but wide enough to route a single trace between pads on standard 1 oz copper.
Rated 4 A per contact at 350 V. The 1.80 mm pitch provides creepage for the 350 V rating without an oversized board footprint.
Mates with the JST SFH series receptacle housing (crimp-terminal style). The detent lock clicks when fully seated — no secondary lock, so the cable-side housing needs to be the correct SFH mate. Termination is solder-only; the SMT pads are tin-plated on the post side.