12-position, 2.54mm pitch, shrouded header with latch lock
The 1-215464-2: This is a 12-position, dual-row header on a 0.100-inch (2.54mm) pitch grid, with the same 0.100-inch row spacing, so it drops onto standard perfboard or any PCB laid out for a 0.100-inch header footprint. Rated 1.5A per contact and 230V, this is a signal-level interconnect — it handles logic, sensor, and low-power I/O, not motor or heater circuits. The latch lock on a full 4-wall shroud means the mating receptacle clicks in and stays put under vibration — a real advantage in industrial cabinets or moving equipment.
Press-fit and solder termination options
Termination is listed as press-fit and solder — the through-hole tails can be wave-soldered or pressed into plated holes designed for compliant-pin insertion, giving assembly flexibility. The contact post length is 0.122 inches (3.10mm), which fits standard 0.062-inch (1.6mm) PCBs with room for a solder fillet or press-fit engagement.