Right-Angle Through-Hole Termination
The 1-2314918-4: Termination is solder through-hole — the 0.083" (2.11 mm) post length is long enough for a standard 1.6 mm PCB with a wave-solder fillet. The post finish is tin (12 µinch), which wets well in lead-free solder processes. The receptacle uses a push-pull fastening type — no locking latch, so it relies on the header's friction retention. In a vibration environment, consider a header with a locking ramp or a board lock to keep the pair mated.
Peer Comparison: 1-2314918-6 vs 1-2314917-4
The closest sibling is 1-2314918-6 — identical specs except 16 positions instead of 14. Another alternative is 1-2314917-4 — same 14 positions and 2.00 mm pitch, but with a 15 µinch gold mating finish instead of 30 µinch. The thinner gold halves the rated mating cycle life; for a one-time assembly or a low-cycle application, the 15 µinch version saves cost. For repeated board-to-board mating, the 30 µinch on this part is the better call.