6-Position Receptacle Housing for Harness Builds
The TE Connectivity 1-2366515-6 is a 6-position receptacle housing from the Dynamic D-1000 series, designed as the wire-side half of a wire-to-board or wire-to-wire interconnect. This is a free-hanging (in-line) housing with a dual-row layout — six female socket cavities arranged in two rows of three. The latch holder fastening provides positive retention against vibration without needing a screw or clip, which speeds field assembly.
Contacts Not Included — Order Separately
This housing ships as an empty shell — contacts are not included. You need to order the matching Dynamic D-1000 crimp female socket terminals separately. The contact termination is crimp, so you'll also need the appropriate hand tool or automatic applicator for the wire gauge range. The housing accepts the standard Dynamic D-1000 female crimp contacts; verify the wire size against the terminal datasheet before committing the BOM line.
Pitch and Mating Half
The Dynamic D-1000 series uses a 5.08 mm pitch between contacts (0.200") — confirmed by the sibling 1-2069882-6 which shares the same 0.200" (5.08 mm) pitch. The row spacing is 0.300" (7.62 mm). This mates with the corresponding Dynamic D-1000 pin header (male) of the same 6-position, dual-row layout. The latch holder on the housing engages with the header's locking ramp for a vibration-resistant connection. Confirm the header part number and orientation (vertical vs right-angle) against your board layout before ordering.