1.00 mm Pitch, 12 Circuits, SMT Locking Header
The 1-2367197-2: The 1.00 mm pitch sets a tight board footprint — each contact carries 1 A at 50 V, typical for signal-level interconnects in space-constrained designs.
SMT Footprint and Routing Density
For a 12-position single-row header, the total board edge occupied is roughly 12 mm plus the shroud overhang — a compact fit for dense layouts. This is a vertical-mount header, so the mated cable exits perpendicular to the PCB — plan for the cable bend radius and clearance above the header. The mating finish thickness is 5.00 µin (0.127 µm) — a standard tin flash for signal contacts.
Peer Comparison: 1-2232960-3
The 1-2367197-2 offers four times the circuit count (12 vs 3) at a finer pitch (1.00 mm vs 2.50 mm), but at half the per-contact current (1 A vs 2 A). The 1-2232960-3 is through-hole, not SMT, and comes in a box rather than tape and reel. For a high-density, SMT-based design, the 1-2367197-2 is the better fit.