The 1-292132-4: This is a 14-position, single-row, shrouded header from TE's CT series, designed for wire-to-board applications where the cable half locks in with a detent latch. Through-hole kinked-pin termination gives a solid solder joint that holds up to vibration better than a straight tail. Rated 125VAC, with current depending on the wire gauge you crimp into the mating receptacle. The tin-on-tin contact system is cost-effective for moderate mating cycles — think appliance or consumer electronics harnesses, not a thousand-mate test fixture.
Locking and housing details
The 4-wall shroud protects the male pins from bending during handling and guides the mating receptacle into alignment. A detent lock on the top wall clicks when fully seated — no secondary latch, but enough retention to keep the pair mated under normal cable strain. The 0.268-inch insulation height gives clearance for the receptacle's backshell.