19 Circuits on 1.50 mm Pitch — Single-Row Board-to-Cable Header
The 1-292228-9 is a 19-position, single-row header from TE's Mini CT series, on 0.059" (1.50 mm) pitch. It mates with a cable-mounted receptacle to carry signal or low-power DC between a PCB and a wire harness. Solder retention tabs on the tails anchor the part during reflow, preventing shift or tombstoning.
With 24 AWG wire, expect roughly 2 A per circuit; with 20 AWG, up to 3 A. The tin-on-tin contact finish is cost-effective for applications with fewer than 50 mating cycles; for frequent field-service disconnect, specify the gold-plated variant in the Mini CT series. Voltage rating is 50 VAC, suitable for internal board-level interconnects in consumer, industrial control, and telecom equipment — not for mains or high-voltage bus distribution.
Housing and Environmental Ratings
Insulation color is beige; insulation height is 0.193" (4.90 mm) above the board surface. The contact mating length is 0.094" (2.40 mm), typical for a 1.50 mm pitch header.