12-Circuit Mini CT Receptacle Housing
The 1.50mm pitch and 12 positions are the two numbers that decide board footprint and harness routing. At 1.50mm centerline, the housing is compact enough for dense cable bundles but still leaves room for hand-crimping 22-28 AWG wire. The 12-circuit count matches a 12-way harness; if the circuit count is lower, unused cavities can be left empty as long as the mating header has corresponding blank positions.
The crimp termination style accepts the standard Mini CT socket contacts; the terminal part number is not listed here, but the series application note specifies the correct wire range and crimp tooling. The free-hanging mount allows the housing to snap into a panel cutout or float in a harness bundle without a PCB footprint.