Skip to main content
Log in
TE Connectivity AMP Connectors 1-440053-4 — Pin Headers

1-440053-4 TE Header R/A 14 Pos 2.5mm Press-Fit

MPN1-440053-4
Active

TE Connectivity AMP Connectors High Performance Interconnect (HPI) header, 1-440053-4, right-angle through-hole, 14 circuits at 0.098" (2.50mm) pitch, shrouded 3-wall, friction lock, press-fit termination, tin-plated contacts, UL94 V-0.

$1.8200Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 1-440053-4 datasheet (PDF)
RoHSROHS3 Compliant
SeriesHigh Performance Interconnect (HPI)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-440053-4 key specifications
ParameterValue
SeriesHigh Performance Interconnect (HPI)
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typeFriction Lock
Voltage rating250V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.165\" (4.20mm)
Insulation materialPolyamide (PA66), Nylon 6/6

All specifications

1-440053-4 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 3 Wall
TerminationPress-Fit, Solder
ApplicationsAutomotive, General Purpose, Industrial, Medical
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions14
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin
Contact length - mating0.157\" (4.00mm)

Product details

Board-edge header for cable-to-board routing

The press-fit termination eliminates solder, a plus for assemblies where reflow is undesirable or lead-free compliance is required. The UL94 V-0 nylon 6/6 housing suits automotive, industrial, and medical enclosures where flame retardance is specified.

Press-fit termination and right-angle board exit

The press-fit termination is a through-hole style that cold-welds into the plated hole — no solder joint to crack under thermal cycling. Contact length on the mating side is 0.157" (4.00mm); the post length is 0.134" (3.40mm).

Frequently asked questions

What is the pinout of TE Connectivity 1-440053-4?

This is a single-row, 14-position header with all positions loaded. The pinout is a straight 1×14 array on 0.098" (2.50mm) pitch. Contact the mating half's datasheet for the wire-to-board mapping.

What is the mating connector for 1-440053-4?

The 1-440053-4 is a shrouded header with a friction lock. It mates with a TE HPI series receptacle housing that accepts the corresponding crimp terminals. The mating half is not listed in this entry; confirm the housing part number against the HPI series drawing.

Is 1-440053-4 RoHS compliant?

Yes, it is ROHS3 compliant.

What is the current rating of TE Connectivity 1-440053-4?

Rated 3 A per contact at 250 V. Derate above 85°C ambient.

Are there any direct replacements or equivalents for 1-440053-4?

No direct replacement is listed. The closest functional alternative is the TE CT series header 1-292164-1, which has 11 positions on 0.079" (2.00mm) pitch with a detent lock — different pitch and position count, so verify board fit before substituting.

What is the pitch of 1-440053-4?

0.098" (2.50mm) pitch.