Skip to main content
Log in
TE Connectivity AMP Connectors 1-5102159-2 — Pin Headers, Sockets & Housings

1-5102159-2 TE Connectivity AMP-Latch Header 64-Pos 0.100"

MPN1-5102159-2
Active

TE Connectivity AMP-Latch header, 1-5102159-2, 64 positions, 2 rows, 0.100" (2.54 mm) pitch, right-angle through-hole, shrouded 4-wall, gold mating finish, 1 A per contact, 250 VAC, UL94 V-0.

$5.9135Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 1-5102159-2 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-5102159-2 key specifications
ParameterValue
SeriesAMP-Latch
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating250VAC
Current rating1A per Contact
Operating temperature-65°C~105°C
Contact materialBrass
Insulation colorBlack
Insulation height0.315\" (8.00mm)
Material flammability ratingUL94 V-0

All specifications

1-5102159-2 additional specifications
ParameterValue
StyleBoard to Cable/Wire
PackageBulk
FeaturesKeying Slot, Mounting Flange
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions64
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.110\" (2.79mm)
Contact finish - matingGold or Gold-Palladium
Contact length - mating0.240\" (6.10mm)
Contact finish thickness - post100.0µin (2.54µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

64-Position Right-Angle Header for Dense Wire-to-Board Routing

The 1-5102159-2: The tin-plated solder tails (100.0 µinch) are standard for through-hole wave soldering.

This header mates with AMP-Latch receptacles that accept the standard 0.100" pitch IDC ribbon cable or discrete-wire crimp housings. The 64-position count is fully loaded (all positions populated), so the BOM line matches the circuit count directly. Confirm the mating receptacle part number against the same AMP-Latch series base code (5102159) to ensure pin-to-socket alignment.

Frequently asked questions

Is the 1-5102159-2 shrouded?

Yes, it is a shrouded 4-wall header.