TE Connectivity AMP-Latch, Header, Board to Cable/Wire, 50 Positions, 0.100" (2.54mm) Pitch, Through Hole, Shrouded - 4 Wall, Push-Pull Fastening, 1A per Contact, -65°C ~ 105°C, UL94 V-0
| Parameter | Value |
|---|---|
| Series | AMP-Latch |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 1A per Contact |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Black |
| Insulation height | 0.388\" (9.86mm) |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Parameter | Value |
|---|---|
| Package | Tube |
| Features | Keying Slot |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 50 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.120\" (3.05mm) |
| Contact finish - mating | Gold or Gold-Palladium |
| Contact length - mating | 0.240\" (6.10mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
The push-pull fastening system provides a positive latch without requiring tools, suited for repeated connect/disconnect in equipment that sees periodic service access.
The brass square-pin contacts are loaded in all 50 positions.
The pitch is 0.100" (2.54mm) on both the mating interface and the row spacing.
Yes, it is ROHS3 compliant.
This header mates with AMP-Latch IDC socket connectors of the same 50-position, 0.100" pitch layout, such as the 1-746285-0 or similar 50-position receptacle housings.
The style is Board to Cable/Wire, meaning it is the board-side header for a cable harness, not a board-to-board stacking connector.