Board-to-Board Receptacle, 13 Circuits, Right-Angle Exit
Pitch, Plating, and Fit for the BOM Line
The 13-position count is less common than 10 or 14 — confirm the mating header has 13 loaded positions before committing the BOM. The gold mating finish (30.0 µinch) contrasts with tin-plated siblings in the same series — gold is the choice for corrosive environments or applications requiring more than 50 mating cycles. Tin is adequate for single-mate harnesses inside a sealed enclosure. Contact length on the post is 0.115" (2.92 mm) — this sets the solder tail protrusion through the PCB. Verify the board thickness and plated-through-hole depth to ensure the tail extends past the barrel for a reliable solder fillet.
Compatibility and Mounting Notes
Push-pull fastening — no locking latch. Insulation height is 0.137" (3.47 mm) above the board surface — this is the clearance needed under the receptacle body for component keep-outs or trace routing on the top layer. The polyester, glass-filled housing carries a black insulator — standard for AMPMODU Mod II. No integral board locks; the through-hole solder tails provide the primary mechanical retention.