TE Connectivity AMP-Latch, Board to Cable/Wire, Header, Male Pin, 50 Positions, 0.100" (2.54mm) Pitch, Shrouded - 4 Wall, Through Hole, Right Angle, Solder Termination, 1A per Contact, 250VAC, -65°C ~ 105°C, UL94 V-0
| Parameter | Value |
|---|---|
| Series | AMP-Latch |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Latch Lock/Eject Hooks, Long |
| Voltage rating | 250VAC |
| Current rating | 1A per Contact |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Black |
| Insulation height | 0.315\" (8.00mm) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Cable/Wire |
| Package | Tray |
| Features | Keying Slot, Mounting Flange |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 50 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.110\" (2.79mm) |
| Contact finish - mating | Gold or Gold-Palladium |
| Contact length - mating | 0.240\" (6.10mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 1-5499141-0: The four-wall shrouding and keying slot prevent mis-mating with the matching IDC socket — a common mistake is grabbing an unshrouded pin strip for a ribbon cable application.
Packaged in tray, this header is ready for hand-load or selective soldering lines; no reel option is listed, so plan for manual or tube feeding if your pick-and-place expects tape.
Yes — it is a shrouded - 4 wall header, meaning the pins are fully enclosed by a box wall on all four sides, with a keying slot and mounting flange for alignment and retention.
Through hole, right angle — the pins exit perpendicular to the board surface, so the connector sits parallel to the PCB edge.
Yes, it is ROHS3 compliant.