TE Connectivity AMP-Latch header, 1-5499913-0, 50-position dual-row, 0.100" (2.54mm) pitch, right-angle through-hole, shrouded with short eject hooks, rated 1 A per contact at 250 VAC.
| Parameter | Value |
|---|---|
| Series | AMP-Latch |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Latch Lock/Eject Hooks, Short |
| Voltage rating | 250VAC |
| Current rating | 1A per Contact |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Black |
| Insulation height | 0.315\" (8.00mm) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Cable/Wire |
| Package | Bulk |
| Features | Keying Slot, Mounting Flange |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 50 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.110\" (2.79mm) |
| Contact finish - mating | Gold or Gold-Palladium |
| Contact length - mating | 0.240\" (6.10mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
The 1-5499913-0: This header uses short eject hooks rather than the long eject hooks found on the sibling 1-5499786-0. The short hooks still latch the cable assembly securely but leave less overhang past the connector body — helpful when board-edge clearance is tight.
The 4-wall shroud and keying slot prevent mis-mating with the cable socket.
Submit an RFQ with your target quantity. We source this active-production part to order; current pricing and lead time are confirmed at quote time.
The pitch is 0.100" (2.54mm), which is the standard spacing for IDC ribbon cable and the matching AMP-Latch socket. A 50-conductor cable assembly mates directly.