TE Connectivity AMP Connectors MTA-100, 1-641215-2, Board to Cable/Wire, Header, 12 Positions, 0.100" (2.54mm) Pitch, Through Hole, Solder, Gold Mating Contact, Friction Lock, UL94 V-0
| Parameter | Value |
|---|---|
| Series | MTA-100 |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Friction Lock |
| Voltage rating | 250VAC |
| Current rating | Varies by Wire Gauge |
| Operating temperature | -55°C~105°C |
| Contact material | Copper Alloy |
| Insulation color | Natural |
| Insulation height | 0.305\" (7.75mm) |
| Insulation material | Thermoplastic |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 1 Wall |
| Termination | Solder |
| Applications | General Purpose |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 12 |
| Contact finish - post | Tin |
| Contact length - post | 0.140\" (3.56mm) |
| Overall contact length | 0.535\" (13.59mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.295\" (7.49mm) |
| Contact finish thickness - post | 150.0µin (3.81µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 1-641215-2 carries a wider pitch (2.54 mm vs 2.00 mm), gold mating finish (30.0 µinch vs tin), and a straight through-hole orientation. If your board already routes 2.54 mm traces and you need the gold mating cycle life, the 1-641215-2 is the better fit. If you need a right-angle entry and can accept tin contacts, the 1-292164-1 is a candidate — but the pitch difference means a different footprint.
1-641215-2 is sourced to order against your BOM quantity.
No — the lifecycle record lists it as RoHS non-compliant. The tin post finish and overall construction do not meet the EU RoHS directive. For RoHS-restricted builds, verify the exemption or select a compliant alternative from the MTA-100 series.
The mating half is typically a TE MTA-100 receptacle housing with the corresponding crimp terminals. Confirm the circuit count and keying before committing the BOM.