4.14 mm pitch, 10-circuit header for wire-to-board harnesses
The 4.14 mm pitch is wider than a standard 0.100-inch header, which means the per-contact current capacity is higher and the board routing is less dense — a trade-off that suits power distribution and signal circuits in industrial, appliance, and automotive interior applications. The housing is fully shrouded with four walls and a locking ramp that engages with the receptacle latch, preventing accidental unmating under vibration.
Current rating depends on wire gauge, not just the contact
In practice, for 18 AWG wire the typical rating is around 9-10 A per circuit; for 22 AWG it drops to about 5 A. The 600 VAC voltage rating is consistent across the series and covers most low-voltage power and signal applications.