TE Connectivity AMP Connectors AMPMODU Mod II, Header, Breakaway, 26 Positions, 0.100" (2.54mm) Pitch, 2 Rows, Through Hole, Solder, Gold Mating Finish, Bulk
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Current rating | 5A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Green |
| Insulation height | 0.110\" (2.79mm) |
| Insulation material | Polybutylene Terephthalate (PBT) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 26 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.126\" (3.20mm) |
| Overall contact length | 0.465\" (11.81mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.228\" (5.80mm) |
| Contact finish thickness - post | 118.1µin (3.00µm) |
| Contact finish thickness - mating | 3.90µin (0.099µm) |
Rated at 5A per contact, this header handles signal-level currents and low-power distribution.
The unshrouded profile (insulation height 0.110") allows this header to mate with standard IDC sockets, crimp housings, or directly with another board-to-board connector. With a total contact length of 0.465" and a mating length of 0.228", the pin protrusion is sufficient for standard socket receptacles. The 0.126" post length suits typical 1.6mm PCBs.
The mating pitch is 0.100" (2.54mm) on both the row spacing and the position-to-position spacing.
Yes, the connector type is listed as Header, Breakaway. The unshrouded design allows snapping individual pin sections if needed, though this part ships as a full 26-position strip.
Confirm the mating half's pitch and row count match.