Skip to main content
Log in
TE Connectivity AMP Connectors 1-87227-1 — Pin Headers, Sockets & Housings

1-87227-1 TE Connectivity AMPMODU Mod II 22-Pin Header

MPN1-87227-1
Active

TE Connectivity AMPMODU Mod II, 1-87227-1, unshrouded through-hole header, 22 positions, 2 rows, 0.100" (2.54 mm) pitch, gold-plated male pins, rated 3 A, UL94 V-0 black thermoplastic housing.

$8.8797Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 1-87227-1 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-87227-1 key specifications
ParameterValue
SeriesAMPMODU Mod II
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~105°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.090\" (2.29mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0

All specifications

1-87227-1 additional specifications
ParameterValue
StyleBoard to Board or Cable
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeCircular
Rows2
Pitch0.100\" (2.54mm)
Positions22
Row spacing - mating0.100\" (2.54mm)
Contact finish - postGold
Contact length - post0.125\" (3.18mm)
Overall contact length0.533\" (13.55mm)
Contact finish - matingGold
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - postFlash
Contact finish thickness - mating15.0µin (0.38µm)

Product details

Board Fit at a Glance: 22 Circuits, Dual-Row 0.100" Pitch

Where This Header Sits in the AMPMODU Mod II Family

This 22-position variant sits near the middle of the position count range — large enough for moderate I/O density on a 2.54 mm grid, but not so wide that it dominates board real estate.

The through-hole solder termination (0.125" post length) suits wave-solder assembly on a standard 1.6 mm PCB — the 3.18 mm post provides enough stand-off for the solder joint without protruding beyond the board bottom.

Frequently asked questions

What is the mating connector for 1-87227-1?

The unshrouded design allows direct connection to a ribbon cable IDC socket or a discrete-wire housing.

Is 1-87227-1 RoHS compliant?

Yes, the part is RoHS compliant per the manufacturer's standard declaration. The gold plating over phosphor bronze contacts and the thermoplastic housing meet current RoHS exemption thresholds.