Skip to main content
Log in
TE Connectivity AMP Connectors 1-87230-7 — Pin Headers, Sockets & Housings

1-87230-7 TE Connectivity AMPMODU Mod II Header, 34 Pos

MPN1-87230-7
Active

TE Connectivity AMPMODU Mod II unshrouded header, 34 circuits, 0.100-inch (2.54 mm) pitch, dual-row, through-hole right-angle, gold-plated square pins, rated 3 A per contact, active production.

$8.8601Ref. price · indicative, final on quote
TE Connectivity AMP Connectors 1-87230-7 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Aug 2026

Specifications

1-87230-7 key specifications
ParameterValue
SeriesAMPMODU Mod II
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~105°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.238\" (6.05mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0

All specifications

1-87230-7 additional specifications
ParameterValue
StyleBoard to Board or Cable
PackageTray
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions34
Row spacing - mating0.100\" (2.54mm)
Contact finish - postGold
Contact length - post0.110\" (2.79mm)
Contact finish - matingGold
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - postFlash
Contact finish thickness - mating15.0µin (0.38µm)

Product details

34 Positions at 0.100-Inch Pitch — Dual-Row Footprint

The 1-87230-7: This AMPMODU Mod II header carries 34 positions in two rows on 0.100-inch (2.54 mm) centers — a standard footprint that mates with matching AMPMODU receptacles and IDC sockets. All positions are loaded, so no depopulated columns to verify against the BOM. The 0.100-inch row spacing matches the pitch, giving a symmetrical grid that simplifies PCB routing and allows use of standard 0.100-inch ribbon cable.

Through-Hole Right-Angle — Board-Edge Routing

The 0.110-inch (2.79 mm) post length is suited for standard 1.6 mm PCBs with solder-wave clearance.

Gold-on-Gold Contact Interface — 15 µinch Mating Finish

Frequently asked questions

What is the pitch of 1-87230-7?

The mating pitch is 0.100 inch (2.54 mm), with the same 0.100-inch row spacing, giving a symmetrical grid.

What is the row count of 1-87230-7?

Two rows, 34 positions total, all loaded.

Is 1-87230-7 unshrouded?

Yes, unshrouded — the pins are exposed, allowing direct probing but requiring correct orientation during mating.