TE Connectivity AMPMODU Mod II unshrouded header, 10 positions, 0.100" (2.54mm) pitch, right-angle through-hole, male pin, gold-plated contacts, 3 A, UL94 V-0, RoHS3 compliant.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C~105°C |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.138\" (3.50mm) |
| Insulation material | Polyamide (PA), Nylon, Glass Filled |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 10 |
| Contact finish - post | Gold |
| Contact length - post | 0.110\" (2.79mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.318\" (8.08mm) |
| Contact finish thickness - post | Flash |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 1-87232-0: That means your PCB layout stays on a 0.100" grid — no oddball spacing to route around.
Rated 3 A per contact. That's a signal-level current — enough for logic-level power and I/O, not for busbar or motor drive. In a field-service I/O module swapped quarterly, that's decades of reliable connection. Phosphor bronze contact material with gold flash on the post side keeps the solder joint reliable through wave soldering.
Yes. Confirm your receptacle's pitch and pin count match before ordering.