5.00 mm Pitch, 4-Position Plug Housing — Junior Power Timer
The 1-929505-1: The 5.00 mm pitch and 0.220" (5.60 mm) row spacing give enough creepage for 12V/24V vehicle electrical systems while keeping the connector compact for tight routing in engine bays or control cabinets. The natural PBT (Polybutylene Terephthalate) housing carries a locking ramp fastening system that provides an audible click when fully mated, resisting unseating from vibration on moving equipment.
Contacts Not Included — Order Crimp Terminals Separately
The listing explicitly notes contacts are not included. The housing accepts tab-type crimp contacts (male terminals) that are ordered separately by the matching TE part number for the wire gauge in use. The 2-row, 4-position layout (2 circuits per row) accepts the standard Junior Power Timer crimp terminals, typically for 0.50–2.50 mm² (20–14 AWG) wire. Confirm the terminal part number against your wire size before committing the BOM line — the housing itself is a passive shell.
Locking Ramp and Free-Hanging Mount
The locking ramp fastening type provides positive retention without requiring a secondary latch or screw. In a free-hanging (in-line) mount, the ramp engages the mating receptacle's catch and holds the pair together under cable strain and vibration. The natural PBT housing is rated for continuous use underhood and inside industrial enclosures where the connector sees occasional fluid splash but not full immersion. No IP rating is stated, so treat it as an unsealed connector for dry or splash-protected locations.
Active Production — Sourced per RFQ
No end-of-life notice or last-time-buy date is on record.