TE Connectivity AMP Connectors AMPMODU Mod II header, 10 circuits, 0.100" (2.54 mm) pitch, dual-row, shrouded 4-wall, through-hole solder termination, gold-plated mating pins, 3 A per contact, detent lock, UL94 V-0 black thermoplastic housing.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Detent Lock |
| Current rating | 3A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.440\" (11.18mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Tray |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 10 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin-Lead |
| Contact length - post | 0.125\" (3.18mm) |
| Overall contact length | 0.533\" (13.55mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.318\" (8.08mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
The 102618-3: The 10 circuits in a dual-row layout (5 per row) keep the board-edge footprint compact while still giving you enough I/O for a ribbon-cable or discrete-wire harness.
The full 4-wall shrouding surrounds the male pins on all sides — this prevents bent pins during blind mating and protects the contacts from accidental shorting against adjacent components.
The contact finish on the post is tin-lead, which is not RoHS compliant. The mating finish is gold. Check your local RoHS exemption status for tin-lead in connector terminations before committing this part to a RoHS-restricted BOM.
No official alternative or replacement is listed by the manufacturer. Any pin-compatible substitute would need to match the 0.100" pitch, 10 circuits, dual-row layout, shrouded 4-wall profile, and through-hole termination. Confirm the mating receptacle and board footprint before substituting.