14-position, 2.54 mm pitch, dual-row shrouded header
The 102618-5 is a TE Connectivity AMPMODU Mod II shrouded header with 14 positions arranged in two rows on a 0.100-inch (2.54 mm) pitch. The four-wall shroud protects the male pins during handling and guides the mating receptacle into alignment, reducing the chance of bent pins during assembly. Rated at 3 A per contact, this header is suited for signal-level interconnects within a board-to-board or cable-to-board topology.
Through-hole solder termination with detent lock
Termination is through-hole solder, with the post length at 0.125 inches (3.18 mm). The overall contact length from the top of the pin to the solder tail is 0.533 inches (13.55 mm). A detent lock on the shroud provides a positive latching feel when mated with a compatible AMPMODU Mod II receptacle, holding the pair together in moderate vibration environments without requiring a secondary locking clip.