TE Connectivity AMPMODU Mod II, 103361-4, shrouded header, 6 positions, 2.54mm pitch, right-angle through-hole, male pin, gold mating finish, 3A per contact, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 3A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.214\" (5.44mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Tube |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 6 |
| Contact finish - post | Tin-Lead |
| Contact length - post | 0.110\" (2.79mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.240\" (6.10mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 0.100" (2.54 mm) pitch matches standard breadboard and prototyping grids, and the 4-wall shroud protects the male pins from damage during handling or mating.
Mating contacts get 30.0 µin (0.76 µm) of gold over the phosphor bronze base, while the solder tails are finished with 100.0 µin of tin-lead. Current rating is 3 A per contact, typical for signal-level loads in this pitch class.
This shrouded header mates with standard AMPMODU Mod II receptacles or IDC sockets at 0.100" pitch. The push-pull fastening type means no locking latch — ensure the mating half has a snug fit for vibration environments.