TE Connectivity AMP Connectors, AMPMODU Mod II series, unshrouded breakaway header, 8 positions, 2 rows, 0.100" (2.54 mm) pitch, male pin, gold-plated mating surface, through-hole solder termination, 3 A rated, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | AMPMODU Mod II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Voltage rating | 30VAC |
| Current rating | 3A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Copper Alloy |
| Insulation color | Black |
| Insulation height | 0.090\" (2.29mm) |
| Insulation material | Thermoplastic |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Termination | Kinked Pin, Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 8 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin-Lead |
| Contact length - post | 0.120\" (3.05mm) |
| Overall contact length | 0.440\" (11.18mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
Gold plating on the mating face at 15 microinches gives this header a solid 500+ mating cycle life — fine for field-service boards where the connector sees periodic reconnects, though the unshrouded design offers no polarization protection against mis-mating.
Yes, the 104351-4 carries an Obsolete lifecycle status. TE Connectivity no longer manufactures this part, and no official replacement has been designated. It is available only through independent surplus channels, sourced per RFQ.
Submit a quote request for lot-specific quantities and lead time.
Headers sharing the base number 104351 with the same 8-position, 2-row, 2.54 mm pitch footprint are the closest form-fit-function match. Verify the contact finish (gold vs tin), mating length (0.230"), and overall contact length (0.440") against your board stack-up before substituting.