TE Connectivity AMP Connectors AMPMODU MTE header, 104363-1, 2 positions, single row, 0.100" (2.54mm) pitch, shrouded 4-wall, latch holder, through-hole solder, gold mating, 3A, -65°C to 105°C, UL94 V-0, RoHS non-compliant.
| Parameter | Value |
|---|---|
| Series | AMPMODU MTE |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Latch Holder |
| Current rating | 3A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Black |
| Insulation height | 0.535\" (13.60mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Tube |
| Features | Keying Slot |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Applications | Automotive, General Purpose, Medical, Telecommunications |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 2 |
| Contact finish - post | Tin-Lead |
| Contact length - post | 0.130\" (3.30mm) |
| Overall contact length | 0.550\" (13.97mm) |
| Contact finish - mating | Gold |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 15.0µin (0.38µm) |
Each contact is rated 3A at the stated temperature range — this is a signal-level current, suitable for low-power interconnects, sensor signals, or control lines.
No, the 104363-1 is RoHS non-compliant due to tin-lead plating on the post. This is a lead-bearing finish, so it cannot be used in applications requiring full RoHS exemption-free compliance.
Yes, the fastening type is Latch Holder, which locks the header to the mating receptacle without a separate screw or tool.
The pitch is 0.100" (2.54mm), the standard spacing for AMPMODU MTE and compatible IDC ribbon cable.