Skip to main content
1052543-1 — TE Connectivity AMP Connectors product photo

TE Connectivity 1052543-1 SMA Receptacle, 50 Ohm, 18 GHz

MPN1052543-1
Obsolete

TE Connectivity SMA receptacle, female socket, 50 Ohm, 18 GHz, 1 port, panel mount with flange, solder cup termination, gold body, 500 mating cycles, -65°C to 105°C.

$4.7800Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

1052543-1 Technical Specifications
ParameterValue
Mounting typePanel Mount
Connector typeReceptacle, Female Socket
Fastening typeThreaded
Voltage rating85 V
Frequency - max18 GHz
Mounting featureFlange
Operating temperature-65°C~105°C
Body materialStainless Steel
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBulk
Impedance50Ohm
Body finishGold
Mating cycles500
Number of ports1
Shield terminationSolder
Contact terminationSolder Cup
Center contact platingGold

Product details

SMA Panel Receptacle for 18 GHz Signal Paths

The 1052543-1: Rated to 18 GHz, it handles the full L-band through Ku-band spectrum — common in microwave test equipment, antenna feeds, and instrumentation backplanes where the signal integrity up to the panel edge matters.

What the 18 GHz and 500-Cycle Ratings Mean

Rated to 18 GHz with 500 mating cycles. Gold-plated beryllium copper centre contact.

Panel mount with a flange, secured by the threaded coupling nut on the mating plug. The centre contact terminates via solder cup — you tin the centre conductor of the coax, insert it into the cup, and flow solder. No crimp tooling needed, but the solder joint quality directly sets the VSWR at higher frequencies — a cold joint or excessive solder wicking up the braid will shift the impedance match.

Frequently asked questions

What is the impedance of 1052543-1?

The 1052543-1 is a 50 Ohm SMA receptacle, which is the standard impedance for RF interconnects in test and telecom applications.