0.100" Pitch, 8-Position Breakaway — Board Fit and Series Position
The 146131-3: The unshrouded design lets you snap off individual positions to match non-standard circuit counts, though this part ships fully loaded at 8 positions. That gold layer buys you 500+ mating cycles in a corrosive-free environment — a step above the tin-plated siblings in the same series, which typically rate for 50–100 cycles before fretting corrosion sets in.
Available through independent distribution channels on a sourced-per-RFQ basis.
The 0.320" (8.13 mm) mating pin length engages standard square-post receptacles with a push-pull fastening — no latch, so it suits low-vibration board-to-board or cable-to-board connections where the pair is mechanically retained by the enclosure or a secondary bracket. Termination is surface-mount solder — the SMT tails are tin-lead plated at 100 µinch thickness.