10-Position Unshrouded Breakaway Header at 0.100" Pitch
The 146252-5 is a 10-position, dual-row unshrouded header from the TE AMPMODU Mod II series. The male square pins are gold-plated on the mating surface at 15.0 µinch (0.38 µm), with a tin-lead post finish for solderable through-hole tails. Rated at 3 A per contact, this header handles signal-level currents and low-power distribution.
Obsolete — Sourced Through Independent Channels
The 146252-5 carries an Obsolete lifecycle status from TE Connectivity. No official successor is listed under the 146252 base number. For BOM positions that require this exact footprint and plating, available inventory is sourced through independent distribution — quantities are lot-specific and confirmed at RFQ. If a pin-compatible alternative is needed, the 146252 series includes other position counts and plating options — but no direct drop-in replacement is recorded from the original manufacturer. A board-level review of the mating half and stack height is advised before substituting.
This is an unshrouded header with push-pull fastening, designed to mate with AMPMODU Mod II receptacles or other 0.100" pitch female sockets. The breakaway construction allows snapping to shorter lengths if needed, though this part ships fully loaded at 10 positions. The tin-lead post finish is compatible with leaded solder processes; for RoHS-only lines, verify the post finish against your assembly requirements.