TE Connectivity AMP Connectors HPI series, 1470224-2, Board to Cable/Wire, Shrouded - 4 Wall Header, Through Hole, Solder, 2 Positions, 0.098" (2.50mm) Pitch, Locking Ramp, Tin Mating/Post, 3A, 250V, -40°C ~ 105°C, UL94 V-2, Bulk, RoHS3
| Parameter | Value |
|---|---|
| Series | High Performance Interconnect (HPI) |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 250V |
| Current rating | 3A |
| Operating temperature | -40°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Ivory |
| Insulation height | 0.232\" (5.90mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-2 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Applications | Automotive, General Purpose, Industrial, Medical |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.098\" (2.50mm) |
| Positions | 2 |
| Contact finish - post | Tin |
| Contact length - post | 0.138\" (3.50mm) |
| Contact finish - mating | Tin |
| Contact finish thickness - post | 50.0µin (1.27µm) |
| Contact finish thickness - mating | 50.0µin (1.27µm) |
It carries a 3 A per-contact rating at 250 V — signal-level current, not a power bus.
No secondary hardware needed — the latch is built into the header body. The insulation height of 0.232" (5.90mm) and post length of 0.138" (3.50mm) set the board-to-mating-housing standoff.
Yes — the fastening type is a locking ramp. It mates with the corresponding HPI receptacle housing and provides a positive latch that resists vibration-induced disconnection.
It is rated 3 A per contact at 250 V. This is a signal-level rating; for higher current requirements, look at the HPI power contact variants in the same series.
Yes, it is ROHS3 Compliant per the manufacturer's status.