TE Connectivity AMPMODU MTE header, 2 positions, 2.54 mm pitch, SMT right-angle, shrouded 4-wall, gold mating finish, 3 A per contact, -65°C to 105°C
| Parameter | Value |
|---|---|
| Series | AMPMODU MTE |
| Type | Male Pin |
| Mounting | Surface Mount, Right Angle |
| Connector type | Header |
| Fastening type | Latch Holder |
| Current rating | 3A |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Black |
| Insulation height | 0.200\" (5.08mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Board or Cable |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Features | Board Lock, Keying Slot, Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Applications | Automotive, General Purpose, Medical, Telecommunications |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 2 |
| Contact finish - post | Tin-Lead |
| Contact finish - mating | Gold |
| Contact length - mating | 0.230\" (5.84mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 147323-1: It uses a 2.54 mm pitch — the standard 0.100-inch spacing that matches a wide range of IDC and crimp receptacles.
The post (solder tail) uses a tin-lead finish, 100 µinch thick, which is compatible with standard leaded solder processes.
Surface mount, right-angle orientation. The pins exit parallel to the board, and the header sits flush against the PCB edge.
The contact finish on the post is tin-lead, which is not RoHS-compliant. The mating finish is gold. Verify your specific compliance requirements before ordering.