24-Position .025 Series Receptacle Housing for Harness Builds
The housing accepts tab-type contacts (sold separately) and provides a dual-row layout on a 2.20mm pitch with 3.00mm row spacing, giving enough room for moderate wire gauges without crowding the cavity.
What the Housing Does and Does Not Include
The note on the listing is not a warning; it is the standard way TE flags that this is a housing-only SKU. The panel-mount feature uses the housing's integral latch or flange to secure it through a cutout, so the assembly stays put when the mating plug is cycled. The dual-row layout means a 24-position harness uses two rows of 12 cavities, which keeps the connector width manageable for a 24-circuit bundle.
The 2.20mm pitch and dual-row arrangement are standard across the.025 family, so the mating half is a plug housing with the same 24-position, 2-row cavity layout. For panel mounting, the housing snaps into a rectangular cutout — the exact dimensions are in the TE product drawing, but the general fit is for a panel thickness in the 1.0mm to 2.0mm range typical of sheet-metal enclosures. The natural colour is the raw PBT resin, no dye added, which is standard for this series.