Screw-Clamp Plug for Industrial Panels
The 1546707-1: This Buchanan 7-position plug uses a screw-clamp termination that accepts 12-30 AWG wire — the wide range covers both power feeds and signal loops in the same block. The 90° wire entry routes conductors parallel to the mating face, which keeps the wiring profile low inside a cabinet or junction box where straight-in access is blocked. Retention latches on the non-wire side and a mating flange lock the plug into the header — the latch prevents the pair from backing apart under vibration, and the flange adds a secondary mechanical tie.
7 Circuits at 5.08 mm Pitch
At 5.08 mm pitch, each circuit has enough clearance for the screw head and the wire entry — this spacing is standard for industrial terminal blocks rated up to 300 V or higher, depending on the header.