TE Connectivity AMP-Latch, Board to Cable/Wire, Header, 26 Positions, 2.54mm Pitch, Shrouded - 4 Wall, Press-Fit/Solder, 1A per Contact, -65°C ~ 105°C, UL94 V-0
| Parameter | Value |
|---|---|
| Series | AMP-Latch |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Push-Pull |
| Current rating | 1A per Contact |
| Operating temperature | -65°C ~ 105°C |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.549\" (13.94mm) |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Parameter | Value |
|---|---|
| Package | Tray |
| Features | Keying Slot, Mounting Flange |
| Shrouding | Shrouded - 4 Wall |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 26 |
| Row spacing - mating | 0.100\" (2.54mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.174\" (4.42mm) |
| Overall contact length | 0.703\" (17.86mm) |
| Contact finish - mating | Gold or Gold-Palladium |
| Contact length - mating | 0.240\" (6.10mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
Current rating is 1 A per contact, which puts this in signal-level duty — it's not intended for power distribution.
Termination is press-fit or solder through-hole. The post finish is 100 µin tin, which solders cleanly to the board. A keying slot and mounting flange are included — the keying prevents mismating with non-keyed receptacles, and the flange provides mechanical retention to the PCB.
The mating pitch is 0.100 inches (2.54 mm), with the same 0.100-inch row spacing. This is the standard AMP-Latch pitch, compatible with common IDC ribbon cable and socket assemblies.
Yes, it has a full 4-wall shroud that encloses the male pins. This prevents pin damage during handling and helps guide the mating connector into alignment.
Yes, it includes a keying slot and a mounting flange. The keying slot prevents mismating with non-keyed receptacles, and the flange provides additional board retention.