TE Connectivity AMP Connectors EI series, 171826-8, Board to Cable/Wire header, 8 positions, 2.50mm pitch, right-angle through-hole, shrouded 1 wall, latch holder, tin-plated contacts, 2A, 250VAC/350VDC, UL94 V-0, Bulk.
| Parameter | Value |
|---|---|
| Series | EI |
| Type | Male Pin |
| Mounting | Through Hole, Right Angle |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 250VAC, 350VDC |
| Current rating | 2A |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.264\" (6.70mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 1 Wall |
| Termination | Solder |
| Applications | General Purpose |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.098\" (2.50mm) |
| Positions | 8 |
| Contact finish - post | Tin |
| Contact length - post | 0.142\" (3.60mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.295\" (7.49mm) |
| Contact finish thickness - post | 31.5µin (0.80µm) |
| Contact finish thickness - mating | 31.5µin (0.80µm) |
A single-wall shroud (0.264" / 6.70 mm insulation height) protects the male pins from incidental contact during handling, though it offers less keying than a full 4-wall shroud. The natural (off-white) color is standard for this series.
Submit a request with your target quantity; we confirm lead time and pricing at quote time. No stock-holding claim — each order is sourced fresh.
The mating pitch is 0.098" (2.50 mm). This is a standard 2.5 mm pitch, common for wire-to-board applications.
Yes, it is shrouded with one wall. The single-wall shroud provides basic pin protection but does not fully enclose the pins like a 4-wall shroud would.
No official replacement is listed. For a functional cross-shop, consider the 1376366-8: same 8 positions, right-angle through-hole, latch holder, but with a 2.20 mm pitch and 4-wall shrouding. Verify your mating half and board layout before substituting.