Skip to main content
TE Connectivity AMP Connectors 173081-6 — Pin Headers

173081-6 TE Connectivity EI Header 6 Pos 2.5mm Pitch

MPN173081-6
Active

TE Connectivity AMP Connectors EI series, 173081-6, Board to Cable/Wire header, 6 circuits, 0.098" (2.50mm) pitch, single row, shrouded with latch holder, through-hole solder termination, gold-plated square pins.

$1.9000Ref. price · indicative, final on quote
RoHSROHS3 Compliant
SeriesEI
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

173081-6 key specifications
ParameterValue
SeriesEI
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typeLatch Holder
Voltage rating250VAC, 350VDC
Current ratingVaries by Wire Gauge
Operating temperature-20°C ~ 95°C
Contact materialBrass
Insulation colorNatural
Insulation height0.409\" (10.40mm)
Insulation materialPolyamide (PA66), Nylon 6/6

All specifications

173081-6 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 1 Wall
TerminationSolder
ApplicationsGeneral Purpose
Contact shapeSquare
Rows1
Pitch0.098\" (2.50mm)
Positions6
Contact length - post0.142\" (3.60mm)
Overall contact length0.551\" (14.00mm)
Contact finish - matingGold
Contact length - mating0.295\" (7.49mm)

Product details

2.50mm pitch, 6-position, single-row shroud with latch

The 173081-6 is a 6-position, single-row header from TE's EI series, pitched at 0.098" (2.50mm) — a common spacing for wire-to-board interconnects in control and power distribution within enclosures. Rated 250VAC and 350VDC, the voltage headroom suits typical 24V or 48V industrial bus voltages with margin.

Gold mating surface and UL94 V-0 housing

Operating temperature range is -20°C to 95°C, adequate for indoor industrial cabinets but not for under-hood or outdoor direct exposure.

Frequently asked questions

What is the mating connector for 173081-6?

The 173081-6 is a male pin header. It mates with a female receptacle housing from the same EI series (TE part numbers starting with 173082 or similar) that accepts crimp terminals. Confirm the circuit count and pitch match before ordering.