What This Housing Does in a Harness
Pitch, Positions, and the Mating Half
The 2.00 mm pitch (0.079") is tighter than the 0.100" industrial standard, which means the mating header and the PCB footprint must match this spacing exactly — there is no fudge factor. No secondary lock or TPA is listed on this housing, so terminal retention depends on the crimp terminal's own lance engaging the housing cavity.
No end-of-life notice or successor part number is on record. The natural colour and bulk packaging are standard.
How It Compares to a Same-Series Sibling
The 1379217-6 is also a 5-position HPI receptacle but with a mixed-layout cavity arrangement (3 + 2 Power) and a locking ramp instead of a latch lock. The 1735447-5 uses a uniform 5-position single row with a latch lock — if your harness does not need the power tap positions, the straight 5-circuit housing is the simpler BOM fit. Both use crimp terminals and free-hanging mounting; the choice comes down to whether the circuit layout needs a power tap or a straight 1x5 row.