2.00 mm Battery Connector — 8 Positions, 6 A per Circuit
The 6 A per circuit rating at 30 V tells you this is sized for portable device battery connections, power tool packs, or small UPS systems where the board-side connector needs to handle charging and discharge currents without the bulk of a larger power connector. Surface mount termination (SMT) means this connector goes through a reflow oven alongside other SMD components — no wave solder step needed. The board guide and flange features help align the connector during pick-and-place and provide mechanical stability against the insertion force of the mating header. The black PA6T housing handles the reflow profile without distortion, and the operating range of -20°C to 80°C covers indoor and most portable equipment environments. Gold plating at 11.8 µin on the copper alloy contacts gives this connector a moderate mating cycle life — better than tin for applications where the battery is periodically disconnected and reconnected, but not rated for the thousands of cycles a gold flash (30+ µ") would support. For a battery pack that sees occasional swaps during service life, this plating grade is appropriate.
This receptacle mates with a male blade header from the same TE 1747786 series — the header carries the blade contacts that insert into these female sockets. The SMT solder tails are designed for reflow soldering to the PCB pads.