What This 6-Position Receptacle Housing Is
Pitch is 0.138" (3.50 mm) — that's the centerline spacing between contact cavities. You order the matching tab crimp terminals separately — the TE part numbers for those are what you'll need on the BOM alongside this housing. The crimp termination means you field-terminate with standard open-barrel crimp tooling; no soldering required. The housing is keyed by the cavity geometry itself — the tab contacts only insert one way, and the mating plug header has a corresponding shroud. No secondary locking ramp is listed on this variant, so the primary retention comes from the terminal latch inside the cavity.
Where It Gets Used
This is a wire-to-wire or wire-to-board interconnect housing, typically found in automotive body harnesses, power distribution boxes, and appliance control wiring.