20-Position Multi-Lock Receptacle Housing, 2.50 mm Pitch
The 0.098" (2.50 mm) pitch and 0.205" (5.20 mm) row spacing give it a compact but serviceable footprint for moderate-density harnesses — enough room to route 20 circuits without squeezing the wire bundles. This is a crimp-termination housing: the contacts are ordered separately (see the note on the listing), so the BOM line needs the matching tab terminals added before the harness shop can build it.
The 175652-2 is a tab-contact receptacle housing, meaning it accepts male tab terminals that crimp onto the wire. The contacts themselves are not included in this order code, so the harness builder needs to source the correct crimp tab terminals separately from the TE Multi-Lock terminal family. The housing has no locking ramp or secondary lock feature noted in the spec, so the mated retention relies on the terminal latch within the housing cavity — a point to verify if the harness will see vibration.
No stock-holding claim; the supply posture is per-request.