Active production, 6-position Multi-Lock header at 3.50 mm pitch
The 175783-2 is an active-production TE Connectivity AMP Connectors Multi-Lock header, 6 positions loaded, on a 0.138" (3.50 mm) pitch. It mates with the corresponding Multi-Lock cable-side receptacle housing — the latch holder and 4-wall shroud keep the pair aligned under vibration typical of automotive and general-purpose environments.
Right-angle through-hole with latch holder retention
Full 4-wall shrouding protects the tin-plated rectangular tab contacts from bending during blind mating or field service.
Pitch and position count contrast with nearby Multi-Lock siblings
Within the same right-angle through-hole, shrouded 4-wall, latch-holder format, the 1394090-1 offers 6 positions at a tighter 0.112" (2.85 mm) pitch — a meaningful difference when board real estate is the constraint. The 1376366-8 runs 8 positions at 0.087" (2.20 mm) pitch, suited for higher-density signal routing. The 175783-2's 3.50 mm pitch supports larger wire gauges and higher current per circuit than either sibling.