12-Position Universal Power Receptacle Housing, 3.96mm Pitch — Contacts Ordered Separately
It carries 3 rows on a 0.156" (3.96mm) pitch with a 0.181" (4.60mm) row spacing, giving it the footprint for moderate-current power distribution in industrial, appliance, and automotive harness assemblies. The panel mount, snap-in feature allows the housing to be secured directly into a panel cutout without additional hardware — useful for bulkhead feed-through or enclosure-wall mounting where the connector needs to be fixed during cable assembly. The latch lock provides an audible click when mated, confirming full engagement with the matching header.
Mating Half and Terminal Selection
The 3-row, 12-position layout on 0.156" pitch defines the mating interface — confirm the header has the same circuit count and row configuration. For the crimp terminals, select the appropriate Universal Power tab contact based on your wire size (typically 18-22 AWG for this series). The housing does not include a secondary lock or TPA — terminal retention relies on the primary lance in the cavity.
Sourced through independent distribution channels. No minimum order quantity breaks are published — request an RFQ for your target volume. The part is available in bulk packaging.