Right-angle 2-pin header for board-to-cable duty
176394-2 is a 2-position, single-row header from TE's CT series, pitched at 2.00mm — a common spacing for wire-to-board interconnects in control and power distribution harnesses. The shrouded 4-wall design protects the gold-plated male pins from damage during handling and guides the mating receptacle into alignment, reducing the risk of bent contacts. Rated for 125VAC, with current capacity dependent on the wire gauge used in the mating half — typical for a signal/power header in this pitch class.
Sourcing and lifecycle status
RoHS3 compliant, bulk packaged, and manufactured by TE Connectivity AMP Connectors.
Mating and termination details
Right-angle through-hole termination with kinked solder pins — the kink provides retention during wave soldering before the joint solidifies. The detent lock on the shroud gives an audible click when mated with the corresponding CT receptacle, confirming full engagement without visual inspection. Insulation is natural PA66 (Nylon 6/6), rated UL94 V-0 for flame resistance inside enclosures.