TE Connectivity AMP Connectors HPI series, 1775443-2, board-to-wire shrouded header, 2 positions, 1.50mm pitch, surface-mount, tin-plated male pins, 3 A, 250 VAC, UL94 V-0 natural thermoplastic housing.
| Parameter | Value |
|---|---|
| Series | High Performance Interconnect (HPI) |
| Type | Male Pin |
| Mounting | Surface Mount |
| Connector type | Header |
| Voltage rating | 250VAC |
| Current rating | 3A |
| Operating temperature | -55°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.197\" (5.00mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Cable/Wire |
| Package | Tube |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Applications | Automotive, General Purpose, Industrial, Medical |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.059\" (1.50mm) |
| Positions | 2 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
| Contact length - mating | 0.106\" (2.70mm) |
| Contact finish thickness - mating | 100.0µin (2.54µm) |
The 1.50mm pitch keeps the footprint small, and the full 4-wall shroud protects the square male pins from bending during cable mating.
Mating pitch is 0.059" (1.50mm) — a tight centerline that suits compact PCB layouts.
Yes, it's a surface-mount (SMD) header — the solder tails reflow with the board, no through-hole or wave-solder step required.
Listed for automotive, general purpose, industrial, and medical use. The 1.50mm pitch and 3 A rating suit it for low-power signal or sensor connections in compact harnesses.
Single row, 2 positions, all loaded.