The 194096-2 is a 4-position, single-row header from TE's MATE-N-LOK II series, designed for board-to-cable/wire connections. The 6.35 mm pitch gives you room to route heavier traces or wires without crowding, and the full 4-wall shrouding protects the male pins during handling and mating. The locking ramp fastening type means the header holds the mating housing securely — useful in equipment that sees vibration, like industrial controls or power distribution panels. Silver plating on the mating surface, 200 µin thick, supports repeated connect/disconnect cycles and higher current than a tin-plated contact would carry at the same temperature rise.
Mating and termination details
This header mates with the corresponding MATE-N-LOK II receptacle housing and crimp terminals — the locking ramp engages with the receptacle latch for a positive hold. Termination is through-hole solder, with a 0.145" post length for standard PCB thickness. The board guide feature helps align the header during assembly, reducing the chance of bent pins when the mating connector is inserted off-angle.