TE Connectivity AMP Connectors Grace Inertia, GIC series, 1971032-3, header, 3 positions, 2.00mm pitch, single row, through hole, shrouded - 4 wall, latch holder fastening, tin-plated square pins, board lock feature, UL94 V-0 natural PA66 housing.
| Parameter | Value |
|---|---|
| Series | Grace Inertia, GIC |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 50V |
| Current rating | Varies by Wire Gauge |
| Operating temperature | -30°C ~ 105°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.256\" (6.50mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6, Glass Filled |
| Parameter | Value |
|---|---|
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Features | Board Lock |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Applications | General Purpose |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 3 |
| Contact finish - post | Tin |
| Contact length - post | 0.102\" (2.60mm) |
| Contact finish - mating | Tin |
At 2.00mm pitch and 3 positions, this header occupies a narrow board footprint — about 6mm wide including the shroud. Compared to a 2.20mm-pitch header like 1376366-8, the 0.20mm pitch difference means the two are not footprint-compatible; always verify the PCB hole pattern against the product drawing.
0.079 inches (2.00mm) centerline spacing. This is a standard 2mm pitch, compatible with Grace Inertia receptacles and 2mm crimp terminals.
Yes, the header is shrouded on all four walls and uses a latch holder for fastening. The shroud provides mechanical polarization — the matching receptacle cannot be inserted upside down.