7-Position Push-In Spring Plug for Terminal Block Interfaces
The screwless push-in spring termination accepts 14-30 AWG wire (0.05-2mm²) — the spring leg clamps the conductor without a screw torque step, which speeds field wiring and eliminates over-torque damage. Rated 300 V (UL) and 9 A per circuit, the plug suits control cabinet, panel, and industrial equipment where the wire-entry side needs tool-less termination and a positive latch.
Wiring and Termination: Push-In Spring vs Screw Clamp
The push-in spring termination (screwless) accepts solid or ferruled stranded wire directly — no screwdriver needed. The spring leg holds the conductor against the current bar; the mating flange locks the plug into the header against vibration. Wire range is 14-30 AWG (0.05-2mm²), which covers most signal and low-power control wiring in a 9 A circuit. The 180° wire entry keeps the cable path straight into the plug body.
Available through independent surplus and distributor channels.