1.00mm Pitch, 14 Positions — Board-to-Board Signal Header
The 1MM-HU-D07-VS-00-H-TBP: The 1.00mm pitch sets a tight footprint — expect 0.039" row spacing, which keeps the PCB routing dense and the mated pair compact.
Mating Stack Height and Contact Geometry
The mating contact length is 0.083" (2.10mm), and the insulation height above the board is 0.059" (1.50mm). When mated with a matching AMPMODU 1MM receptacle, the resulting stack height is approximately 2.10mm plus the receptacle height — typical for this series, the mated pair sits around 3.5–4.0mm off the board, depending on the receptacle variant. Termination is SMT with a pick-and-place feature on the reel — the header is shipped in a box, not tape, so plan for tray or tube feeding if your pick-and-place line expects tape. The square male pins (0.40mm typical for 1.00mm pitch) mate with AMPMODU 1MM crimp or IDC receptacles.